Description
Toyota Push Type cable ties 7.2 x 155mm, 100 per pack. The clip is moulded into the tie, so you push it into a hole and it locks in place, holding the run flat against the panel with no screw, rivet or separate mount.
Made for the factory clip holes on Toyota vehicles. The clip has to match the hole, so measure the hole or match the vehicle make before you order.
Good for
- Re-fitting factory looms after repairs
- Holding wiring flat against body panels
- Neat runs inside enclosures and cabinets
No hole to clip into? Use mountable cable ties or adhesive cable tie mounts. See all push type cable ties. Order 5 to 9 packs of this line and each pack is 10% off; order 10 or more and each pack is 20% off. The cart applies it automatically.





Reviews
There are no reviews yet.