Description
Push Type cable ties 3.6 x 150mm, 100 per pack. The clip is moulded into the tie, so you push it into a hole and it locks in place, holding the run flat against the panel with no screw, rivet or separate mount.
Made for lighter wiring on thin panels with a drilled hole. The clip has to match the hole, so measure the hole or match the vehicle make before you order.
Good for
- Re-fitting factory looms after repairs
- Holding wiring flat against body panels
- Neat runs inside enclosures and cabinets
No hole to clip into? Use mountable cable ties or adhesive cable tie mounts. See all push type cable ties. Order 5 to 9 packs of this line and each pack is 10% off; order 10 or more and each pack is 20% off. The cart applies it automatically.





Reviews
There are no reviews yet.