Description
10mm single wall heat shrink tubing, sold by the metre and cut to the length you order. Slide it over the join, apply heat, and it shrinks down tight to insulate and protect the wire.
At 10mm it slides over parts up to about 10mm across and, at a typical 2:1 ratio, shrinks to roughly 5mm, so it grips anything between those two sizes. One metre gives 25 sleeves of 40mm.
Single wall tubing insulates and tidies but does not seal. For joins exposed to water, choose 3:1 dual wall heat shrink, whose adhesive liner melts to seal the join.
Good for
- Battery leads up to 16mm²
- Small looms entering a connector
- Covering yellow crimp terminals
Choose a diameter that slides easily over the widest part of the join. See all single wall heat shrink sizes.


Reviews
There are no reviews yet.