Choose 304 stainless steel cable ties for most outdoor, industrial, solar and hot engine-bay work inland, and 316 stainless steel cable ties within a few kilometres of the coast, on boats and jetties, and around pools or chemicals. Both shrug off heat and UV. The difference is salt: 316 contains molybdenum, which resists chloride corrosion far better than 304.
This guide compares the two grades, shows where each belongs, explains when nylon-coated ties make sense, and lists the sizes we stock.
What is the difference between 304 and 316 stainless steel?
Both are austenitic stainless steels that look identical. 316 adds about 2% molybdenum, which greatly improves resistance to pitting and crevice corrosion from chlorides.
| Property | 304 stainless | 316 stainless |
|---|---|---|
| Typical make-up | About 18% chromium, 8% nickel | About 16 to 18% chromium, 10% nickel, 2% molybdenum |
| UV and sunlight | Not affected | Not affected |
| High heat | Excellent | Excellent |
| Salt spray and sea water | Can pit and tea-stain within a season on the coast | Much better resistance |
| Pool and cleaning chemicals (chlorides) | Fair | Good |
| Cost | Lower | Higher |
| Magnetic? | Slightly, after cold working | Slightly, after cold working |
Where should I use 304 stainless cable ties?
304 is the general-purpose grade, and it is the right choice for most jobs away from the sea.
- Inland solar farms and rooftop arrays.
- Sheds, farm buildings and machinery.
- Mine sites, quarries and processing plants away from the coast.
- Cable tray and ladder in industrial buildings.
- Exhaust-side wiring and hot engine bays, where nylon would soften.
- Road signage and traffic equipment inland.
Our 304 stainless steel cable ties come in 4.6mm and 7.8mm widths.
When is 316 marine grade worth the extra?
316 is worth paying for wherever salt or chlorides reach the tie. On a coastal site, 304 can show rust spots and brown “tea staining” within a season, where 316 stays clean.
- Within a few kilometres of the coast, where salt spray carries on the wind.
- Boats, jetties, marinas and wharves.
- Pool plant rooms and around chlorinated water.
- Chemical plants, food processing wash-down areas and other places cleaned with chloride-based chemicals.
- Coastal solar and telecommunications sites.
See our 316 stainless steel cable ties, also in 4.6mm and 7.8mm widths.
Which grade suits which job?
| Where the tie lives | Grade |
|---|---|
| Inland outdoor, solar farms, sheds, mines | 304 |
| Hot engine bays, exhaust-side wiring | 304 |
| Within a few kilometres of the coast | 316 |
| Boats, jetties, marinas | 316 |
| Pool plant rooms, chemical plants | 316 |
| Painted frames, aluminium rails or vibrating cable | Nylon-coated stainless |
What about nylon-coated stainless ties?
Nylon-coated stainless ties have a stainless strap with a plastic coating. The coating stops bare steel scratching paintwork or cutting into cable insulation as the cable moves, and it separates the steel from other metals such as aluminium solar rails.
That separation matters because two different metals touching in damp, salty air can corrode faster than either would alone. Coated ties are a common choice on solar rails, painted switchboard frames and anywhere a cable vibrates against the strap.
Which sizes do you stock?
| Width | Lengths | Good for |
|---|---|---|
| 4.6mm | 200, 300, 350, 500mm | Cable bundles, cable tray, PV cable to rails |
| 7.8mm | 250, 350, 500mm | Heavy bundles, pipe, conduit and signage |
Both widths are available in 304 and 316. Use the bundle size chart to pick the length.
How should stainless cable ties be fitted?
Stainless ties are hard to tension by hand and leave a razor-sharp tail if cut with snips. A stainless steel cable tie gun tensions and cuts flush in one action. Wear gloves, and see how to install stainless steel cable ties for the full method.
Quick answers
Is 316 stainless better than 304?
For salt and chlorides, yes. For inland jobs, 304 performs just as well for less money.
Will 304 stainless rust near the beach?
It can show surface rust and tea staining near the coast. Use 316 within a few kilometres of the sea.
Are stainless cable ties stronger than nylon?
They are much tougher in heat, sun and chemicals and do not degrade outdoors, which is why they are used for long-life installs.
Can I use stainless ties on aluminium solar rails?
Coated stainless ties are the safer choice, because they keep the steel from touching the aluminium.

