Description
2.4mm 3:1 dual wall heat shrink, sold by the metre and cut to the length you order. It shrinks to about a third of its supplied size, down to roughly 0.8mm, and the adhesive inner liner melts as it shrinks to seal the join against water and dirt.
The 3:1 ratio lets one size cover a bigger step: 2.4mm tubing passes over a part up to 2.4mm across and still grips a lead as thin as about 0.8mm. A heat gun with a reflector nozzle keeps the heat on the tube and off nearby insulation.
Good for
- Single wires and solder joins
- Small crimp terminals
- Sensor and trailer plug leads
Heat evenly from the middle outwards until a small bead of adhesive shows at each end. For dry, indoor joins, single wall heat shrink costs less. See all dual wall sizes.


Reviews
There are no reviews yet.