Dual handcuff cable ties keep two hydraulic hoses, or a hose and a wiring loom, apart so they cannot rub through each other. Each hose sits in its own locking loop on one wide 12.7mm strap, with a gap between them. Fit them where hoses would otherwise touch and every 300 to 500mm along parallel runs, and leave moving hoses free to flex.
This guide explains why hoses wear through, how handcuff ties work, which length to choose, and how to fit them on trucks, plant and machinery.
Why do hydraulic hoses wear through?
Hydraulic hoses on machinery move every time the machine works: they flex with booms and arms, pulse with pressure and vibrate with the engine. Where two hoses touch, that movement rubs the outer covers until the wire reinforcement shows, and then the hose fails.
A hydraulic hose failure means downtime, oil on the ground, and a risk of injury from high-pressure fluid. Separating hoses is cheap insurance.
How does a dual handcuff cable tie work?
A dual handcuff cable tie has two locking heads on one wide strap. Each hose goes in its own loop, and the centre section between the heads keeps a gap between them.
The 12.7mm strap spreads the grip over a wide area, which is kinder to hose covers than a narrow tie. Because each loop is tightened separately, two hoses of different sizes can be held in one tie.
Which length handcuff tie should I use?
| Length | Typical use |
|---|---|
| 330mm | Heater hose pairs, small hydraulic lines, a hose next to a wiring harness, air-conditioning lines |
| 490mm | Larger hydraulic hose pairs, thick looms beside heavy hose, air and coolant hose on trucks and plant |
Each loop needs to wrap one hose with room for the tail. If you are not sure, measure around each hose and use the bundle size chart as a guide for each loop.
How do I fit dual handcuff ties?
- Run the machine through its full range of movement and note where hoses touch or come close.
- Fit a handcuff tie at each contact point, and every 300 to 500mm along parallel runs.
- Close the first loop around one hose, snug but not crushing.
- Close the second loop around the other hose to the same tension.
- Check that hoses can still flex where they need to. Do not lock a moving hose rigidly to a fixed one.
- Trim the tails flush so they do not catch on other hoses or on operators.
- Cycle the machine again and check nothing rubs or pulls tight.
Where are handcuff ties used?
- Excavator, loader and crane booms with paired hydraulic lines.
- Tipper and truck hydraulics, PTO lines and air lines.
- Tractor and farm implement hydraulics.
- Forklift masts and attachments.
- Air-conditioning and coolant hoses next to wiring looms.
- 4WD and trailer hydraulics; see cable ties for cars, 4WDs and trailers.
What other parts help with hose management?
Hydraulic swivels stop hoses twisting at the fitting on rotating attachments, which is a common cause of early hose failure. For fixing hose to structure, heavy 12.6 and 12.7mm black ties spread the load across the hose cover. For sealing hose onto fittings, use hose clamps, not ties; see hose clamp types explained.
How often should handcuff ties be checked?
Inspect them at each service. Look for ties that have cracked, slipped along the hose or been chafed, and hoses that show wear near a tie. Black nylon handcuff ties are UV stabilised, but heat from engines and sun on dark machinery shortens their life, so replace any that look tired. Handcuff ties are sold singly for repairs and in packs of 50 for fleets.
Hydraulic systems must be maintained by competent people. Never inspect or handle hoses on a machine that is running or under pressure.
Quick answers
What are dual handcuff cable ties used for?
To hold two hoses, or a hose and a loom, apart so they cannot rub through each other.
Can I use a handcuff tie on two different sized hoses?
Yes. Each loop is tightened separately.
How far apart should handcuff ties be?
At every point where hoses would touch, and about every 300 to 500mm along parallel runs.
Can I buy single handcuff ties?
Yes. They are sold singly for repairs and in packs of 50.


